How To Change Gear Shift Light Bulb On A 2008 Ford Focus

It can be annoying too as unsafe when it's dark and you lot can't come across what gear y'all just shifted into. This problem tin can be due to burnt out console shift indicator bulbs. Console shift indicator bulbs are sometimes unpredictable as they tin can last the life of the motorcar, or leave in no time.

typical console bulb

With some basic tools, y'all can easily swap out the old console shift indicator seedling with a new i.

Part i of 1: Remove the shifter surround

Materials needed

Appropriate replacement seedling for your vehicle
Multi-piece driver prepare
Trim removal tool

shifter trim removal

Step 1: Remove the shifter surround. Select the advisable trim removal tool and gently pry up on the shifter environs at numerous locations around it, rather than trying to forcefully pry information technology from merely one spot. This manner, you lot are less likely to damage the trim.

Notation: Some vehicles may require removing the shifter handle / knob. Since trim removal can vary from vehicle to vehicle, confirm if this is necessary for your vehicle before proceeding. Some shifters are screwed on. Others may be held in place past a large clip or set up-screw.

Step 2: Unplug the electrical connector. The connector/ bulb should exist located at either terminate of the gear indicator - usually at the top, near the P sign on the indicator.

The connector may be a simple clip on one or of a twist in/out type. Cheque the connector to decide its blazon and gently remove it. You should now have the faulty bulb in hand and you lot can supplant information technology with the new one.

Switch the lights on to verify that the new bulb works correctly before y'all reinstall the trim.

common led replacement bulb

Tip: Consider replacing your old console shift indicator bulb with an LED bulb for brighter calorie-free and longer life, if one is available and suitable for your vehicle.

Pace 3: Reinstall the console trim panel. Put back any panels and screws y'all may have removed in order to gain admission to the connector.

Replace the panels and components in the reverse order of how you removed them.

If you are non comfortable in performing this process on your own, become ane of the certified mobile technicians from YourMechanic to come up to yous and replace the shift indicator or other bulbs for you lot.

The statements expressed above are only for advisory purposes and should be independently verified. Please see our terms of service for more than details